Contact Us
Position:Home > News > Industry News >

Latest news A new method for measuring carbon nanotubes

2017-04-20 15:25 View:
With this method can be measured e.g. the number of single walled carbon nanotubes and their concentration in a carbon nanotube layer.
Researchers working at the Aalto University and at the Royal Institute of Technology KTH in Stockholm have developed a new method for measuring the number of single walled carbon nanotubes and their concentration in a carbon nanotube layer.
The novel method is based on measurement of the Raman spectrum together with precise measurement of mass and optical absorbance. The dependence of the number of the CNTs on the phonon scattering intensity is observed. This method opens an opportunity for the quantitative mapping of sp2 bonded carbon atom distribution (i.e. those atoms that form the carbon nanotubes with bonds to three other carbon atoms) in the CNT layers with a resolution limited by the focused laser spot size.
The carbon nanotube (CNT) has a structure of a rolled single layer of graphene, where each carbon atom is bonded with three other carbon atoms. Basically the nanotube can be considered as one large molecule. The length of a CNT varies from one to one hundred micrometers while its diameter is of the order of one nanometer


Raman spectra for SWCNT samples with different optical transparencies (%).
 
CNT based materials are intensively studied due to a number of novel and unique properties that make them potentially useful in a wide range of applications. Extremely thin CNT layers offer outstanding properties like excellent flexibility, optical transparency, high electrical conductivity, extremely small weight, and low processing costs. Optical and electrical properties of a CNT layer can be varied with changing, e.g., the diameter and length of nanotubes or the amount of carbon nanotubes in the layer.
'CNT layers can be used for fabrication of transparent electrodes, fuel and solar cells, supercapacitors, etc. Therefore, a measurement technique for the number of carbon nanotubes in the CNT layer is very useful,' says Irina Nefedova, one of the researchers in this project, who defended her thesis of electrical and optical properties of carbon nanotubes in March 2017 at Aalto University.

Bio-magnetic beads, Sulfydryl modified
Huitong TM Samples mixed instrument|100%
Magnetic beads method glue recovery kit
Nano cerium oxide powder (CeO2 powder)
Nano Tungsten disulfide powder
Tungsten carbide nano powder (99.9% )
Nano Dy2O3 powder
Nano Cobalt powder (Nano Co powder)
Nano Aluminum oxide powder (Nano Al2O3Powder)
Nano Boron carbide powder (Nano CB4 Powder)
Tantalum carbide powder (nano particle size)
Nano titanium(Ti) Powder
Nano Titanium carbide powder (Nano TiC powder)
High purity Nano Manganese(Mn) powder
Nano SiO2 Powder
Nano Fe2O3 powder (99.9%)
Nano Aluminium Nitride powder (Nano AlN powder)
Nano Tungsten disulfide powder (Nano WS2 powder)
chitosan beads
aldehyde beads | aldehyde modified microsphere
Bio-magnetic beads, Carboxylic modified
Bio-magnetic beads, Amino modified
Bio-magnetic beads, Silicic modified
Magnetic fluid
Nano SiO2 dispersing agent
Nano Co dispersing agent
Nano oxidation zinc dispersing agent
Nano silver Soil antibacterial agent
Polyurethane release agents
Nano silver Powder (Nano Ag powder purity 99.99)
Thiadiazole-octyl mercaptan condensates(CAS No: 13539-13-4)
Dimercapto-thiadiazole dimerBis-DMTD
DMTD(2,5- dimercapto-1,3,4- thiadiazole)
Methylene bis (dibutyl dithio carbamate)
MoDTC Complexes (Solid MoDTC)
MoDTP (Liquid Molybdenum Dithiophosphate)
Nano Co dispersing agent
Water-based magnesium stearate
Polyurethane Internal Release Agent
Water-based zinc stearate (Vinyl lubricant )
Stearic acid amides emulsion for themal paper
Water-Based Calcium stearate
Coated with abrasive coating slurry