Tantalum Carbide ceramic is a ceramic that contains a seven-crystal phase of Tantalum Carbide

Tantalum Carbide ceramic is a ceramic that contains a seven-crystal phase of Tantalum Carbide

2023-02-17 19:31:40  News

What is Tantalum-Carbide? Tantalum Carbide (TaC) are binary compounds that consist of Tantalum or carbon. Their empirical formula is TaCX. X can vary in an arbitrary range from 0.4 to 1 They are extremely tough, hardy, and fragile refractory ceramic materials that can be metal-conductive. They come as a brownish-gray powder, and they are often sintered.
Tantalum Carbide can be used as a cermet and commercially for cutting tools. Sometimes, it is added to the tungsten Carbide alloys.
Tantalum-Carbide ceramics are ceramics that contain seven crystal phases of TantalumCarbide. TaC stands for face-centered cubular lattice. Based on purity and measurements, the theoretical density was 1.44. This number is among the most high-ranking binary compounds. This value is the highest among binary compounds. Hafnium Carbide has an approximately 3942 degree C melting point. While hafnium Carbaide's melting point is similar to TaC, it has a somewhat higher melting point.

TaCX Powders are made from the components by heating mixtures of graphite and tantalum in vacuum or under an inert gas atmosphere such as argon. An arc melting or furnace heats the mixture to around 2000degC. You can also reduce tantalum Pentoxide by adding carbon to it in either a vacuum or hydrogen atmosphere between 1500-1500C. Tantalum Carbide was prepared using this method in 1876. Due to the lack of stoichiometric monitoring, the product could be produced directly from the elements via self-spreading hightemperature synthesis.
A complex combination of ions and metals makes it possible to bond tantalum with the carbon atoms within carbides. Due to their covalent structure, carbides are extremely hard and brittle. TaCX, for example, has a microhardness range of 160 to 2000 kg/mm2[16] (9mohs), and an elastic modulus between 285 GPa and 285 GPa. Tantalum, on the other hand, is 110 kg/mm2 [186 GPa], while these values are 110 and 186 GPa respectively.
Tantalum Carbide is electrically conductive to metals, both size and temperature-dependent.TaC is a kind of superconductor with high transition temperature Tc = 10.35 K.

Is tantalum carbide as strong?
Tests of Vickers hardness, fracture toughness and relative density were done on a variety of samples. It was found that TaC has excellent mechanical properties, with a melting point of 5.5 GPa. TaC has a relative density of 7.4 MPa m1/2 as well as Vickers hardness at 97.7%.

For what purpose is tantalum-carbide used?
Tantalum Carbide is chemically stable, and it was not soluble in acids. The antioxidant properties of Tantalum Carbide are strong. They were usually prepared from tantalum pentoxide in an inert atmosphere or reductive atmosphere. By hot pressing, sintering is possible to produce high-density products and metallic luster. They are used in aerospace and cement carbide additives. Tantalum Carbide, a metallic white cubic crystal powder of the sodium-chloride type cubic crystals system is light brown. It is insoluble and insoluble with water. However, it can be dissolved in hydrofluoric and nitric acids. It can be easily melted to decompose by potassiumpyrosulfate and has a strong resistance against oxidation. It has high electrical conductivity and a large resistance at room temperatures of 30O.
Where is tantalum caride useful? Due to its outstanding physical properties (melting point, hardness. elastic modulus and thermal shock resistance), tantalum caride is often used in a variety of applications, including as a sintering agent in ultra high temperature ceramics (UHTCs).
Tantalum carbide is an additive in powder metallurgy. Titanium Carbide can be worn as an ornament on watches because of its sintered body. Tantalum Carbide is also an inhibitor for grain growth in sintered Cemented Carbide. It has a density 14.1g/cm3.

Is tantalum carbide toxic?
Tantalum Compounds - The systemic toxicity of tantalum dioxide and metallic tantalum are low. Its solubility is probably the reason. Carbides - Pure carbon can be safely handled, and even consumed in the form graphite or charcoal.

Poseidon is a deep, unmanned submersible
2016: A London team discovered Tantalum Carbide or TaC and hafnium Carbide (HfC), which are ceramic materials with the highest melting point known, can be withstand temperatures up to 4,000°C.
Tantrum Carbide as well as hafnium Carbide have a higher resistance to heat than other known materials. They shield a spacecraft against the heat from exit or reentry.
Omar Sediroth Baraza (researcher) stated that spacecraft’s nose caps and scientific equipment need high-temperature resistance materials. Tantalum Carbide and hafnium Carbide may be useful for supersonic future missions. You could use it to create shells for supersonic airplanes that can fly in under 50 minutes from London to Sydney, creating new opportunities worldwide.

Tantalum Carbide Supplier
Rboschco (aka. Rboschco Technology Co. Ltd., a trusted supplier and manufacturer of global chemicals with more than 12 years of experience in manufacturing super-high-quality chemicals. A number of products have been developed by our company. Tantalum carbide produced by our company is high in purity, small particle size, and has low levels of impurity. To find out the current Tantalum Cartbide price, please send an email or click the appropriate products to send an enquiry.


0086-18937960017 sales1@rboschco.com skype whatsapp
  • WhatsApphttps://www.rboschco.com/mobile/